Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Electroreductive synthesis of 1-(bromobenzyl)-isoquinoline derivatives and its application to cularine synthesis

Electrochemical reduction of immonium salts in the presence of bromobenzylbromide derivatives gave 1-(bromobenzyl)-isoquinoline derivatives in moderate yields. This reaction is useful in the synthesis of several natural alkaloids as exemplified in the synthesis of Cularine.     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

Dynamics for reaction of an ion pair in aqueous solution: reactivity of carboxylate anions in bimolecular carbocation-nucleophile addition and unimolecular ion pair collapse

[reaction: see text]. The sum of the rate constants for solvolysis and 18O-scrambling of 4-MeC6H4(13)CH(Me)18OC(O)C6F5 in 50/50 (v/v) trifluoroethanol/water, k(solv) + k(iso) = 1.22 x 10(-5) s(-1), is larger than k(solv) = 1.06 x 10(-5) s(-1) for solvolysis of the unlabeled ester. This shows that the ion pair intermediate undergoes significant internal return. The data give k(-1) = 7 x 10(9) s(-1) for internal return by unimolecular collapse of the ion pair, which is significantly larger than k(Nu) = 5 x 10(8) M(-1) x s(-1) for bimolecular nucleophilic addition of carboxylate anions to 4-MeC6H4CH(Me)+.     

Development of molecular imaging tools to investigate protein functions by chemical probe design

Molecular imaging technologies, which enable the visualization of the behaviors or functions of biomolecules in living systems, have received considerable attention from life scientists. Novel imaging technologies that overcome the limitations of current imaging techniques are desired. In this review, two independent technologies that were recently developed by the authors are described. The first technology is for smart (19)F magnetic resonance imaging (MRI) probes that were developed for in vivo applications. These probes were developed by exploiting paramagnetic relaxation enhancement in order to detect hydrolase activity. With respect to cellular applications, gene expression in cells was visualized using one of the (19)F MRI probes. It was confirmed that this probe design principle is effective for various hydrolases, and broad applications are expected. The second technology is for practical protein labeling. This labeling method is based on a mutant β-lactamase and its specific labeling probes. Since the probe is fluorescence resonance energy transfer (FRET)-based, this labeling method achieves both specific and fluorogenic labeling of target proteins. In addition, derivatization of the probe enabled the labeling of intracellular proteins and the modification of various functional molecules.     

Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.     

Structural disorder and diffusional pathway of oxide ions in a doped Pr2NiO4-based mixed conductor

MEM nuclear density analysis from neutron diffraction data measured in situ at 1015.6 degrees C has indicated the two-dimensional network of curved O2-O3-O2 oxide-ion diffusion paths on the (Pr,La)-O layer in a K2NiF4-type structured oxide-ionic and electronic mixed conductor (Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+delta.     

A periodic first principle study to design microporous crystal 12MO, 7Al2O3 for selective and active O radicals encaging

Periodic first principle calculation correlates the role of metal substitution (Sr and Ba in place of Ca) on selective encaging of active O⁻ radicals inside the microporous 12MO, 7Al₂O₃ crystal structure. We have exchanged Ca by Sr and Ba and as well extracted electron stepwise to monitor selectivity of different anion encaging inside the same structure type. Ca favors O²⁻ encaging and shows no electron transition when neutral, whereas Sr shows no transition in absence of unpaired electron and can successfully trap O⁻, Ba though less active than the other metal substituents shows oxygen encaging at its zero and mono-positive state.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.